manualshive.com logo in svg

Siemens Advance Network Gateway, User Manual, Page: 17 / 72

Share
Download
Siemens Advance Network Gateway User Manual Download Page 17

2000590-001

Installation  

••

  9

Chapter 2

Installation

Introduction

This chapter is intended for installation personnel. After completing the pro-
cedures, within this Chapter, the Advance Network Gateway will be ready for
operation.

Ensure that all AC Power (Mains) Specification requirements and advisories
are met. Failure to do so, and operating the equipment in a manner not
specified, may impair the safety protection provided by the equipment.

Before beginning the installation process read through this Chapter to famil-
iarize yourself with the installations requirements.

The following table provides a recommended sequence of events you should
follow to ensure a safe and trouble free installation.

Topic

See Page

Unpacking and Inspection 10

Pre Installation Planning 11

Wall or Rack Mounting 14

CE Installations 15

Wiring Connections 17

AC Power (Mains) Connections 18

Data Hiway Connections 20

Ethernet Connections 23

Overview

WARNING

Installation Overview

Summary of Contents for Advance Network Gateway









































































Reviews:

No comments