Operating the device
4.2 Operating KP300 Basic
Basic Panels
62
Operating Instructions, 04/2012, A5E02421799-03
Operating a project
Proceed as follows:
1.
To navigate between operating elements:
–
Press <TAB> to navigate within a configured TAB order.
–
Use the cursor keys to navigate freely between operating elements.
The operating element is selected.
2.
Press <ENTER> to activate the operation of a selected operating element.
–
Depending on the operating element, enter values or select them from the available
list entries.
3.
To close the operation of an operating element:
–
Press <ENTER> to apply any changes.
–
Press <ESC> to discard any changes.
Entering numbers and characters
The function keys are used to enter numbers and characters.
Proceed as follows:
1.
Activate the operation of the operating element.
2.
Press the respective key repeatedly until the character you want appears on the screen.
The assignment of the function keys to letters and numbers can be restricted based on
the format of the operating element.
The desired character is applied in about one second or immediately after pressing a
different button.
3.
To navigate within the given character string, use the cursor keys.
4.
Press <ENTER> to apply the entry.
Checking numerical value limits
Tags can be assigned limit values. Any entry of a value outside this limit is rejected. If an
alarm view is configured, a system alarm is triggered and the original value is displayed
again.
