Siemens 340 Manual Download

Page: 96 / 174

Connection

6.7 Connecting the infeed system (option)

SIRIUS 3RM1 motor starter

Manual, 11/2013, A5E0345285095020A/RS-AB/002

6.7

Connecting the infeed system (option)

WARNING

Hazardous Voltage.

Can Cause Death, Serious Injury, or Property Damage.
Turn off and lock out all power supplying this device before working on this device.

Requirements

Please note the following requirements for mounting the 3RM19 infeed system:

●

Make sure the rated operational current of the infeed system (IEC: 25 A; UL: 16 A) is not

exceeded.

●

The 3RM1 motor starters are mounted next to each other on a mounting rail or a level

mounting surface.

●

The mounting system is only suitable for main current terminals with screw connections.

●

Cross-tip screwdriver size PZ 1 x 80

●

For suitable connection cross-sections of the cables for the infeed terminal, see the

Chapter "General technical data (Page 128)".

Summary of Contents for 340















































































































































































Search results

Summary of Contents for 340

Reviews:

Related manuals for 340

Brands by name

Popular brands

Siemens 340, Manual

Search results

Summary of Contents for 340

Reviews:

Related manuals for 340

Brands by name

Popular brands