Siemens 340 Manual Download Page 20

Page: 20 / 174

Product-specific safety information

2.5 Current information about operational safety

SIRIUS 3RM1 motor starter

Manual, 11/2013, A5E0345285095020A/RS-AB/002

2.5

Current information about operational safety

Important note for maintaining operational safety of your system

WARNING

Hazardous Voltage.

Can Cause Death, Serious Injury, or Property Damage.
Please take note of our latest information
Systems with safety-related characteristics are subject to special operational safety

requirements on the part of the operator. The supplier is also obliged to comply with special

product monitoring measures. For this reason, we publish a special newsletter containing

information on product developments and features that are (or could be) relevant to

operation of safety-related systems. By subscribing to the appropriate newsletter, you will

ensure that you are always up-to-date and able to make changes to your system, when

necessary:
Siemens newsletter (

http://www.industry.siemens.com/newsletter

)

Sign on to the following newsletter under "Products & Solutions":

•

Control Components and System Engineering News

•

Safety Integrated Newsletter

2.6

Declaration of conformity

The manufacturer declares that the safety components of the 3RM1 motor starter series in

the designs marketed by us comply with the applicable basic health and safety requirements

of the EC Directives* stated (including amendments), and that the stated standards* were

applied in their design and construction.
* You can download the complete EC Declaration of Conformity from the Internet

(

http://www.siemens.com/industrial-controls/approvals

) as a PDF.

Summary of Contents for 340















































































































































































Search results

Summary of Contents for 340

Reviews:

Related manuals for 340

Brands by name

Popular brands

Siemens 340, Manual

Search results

Summary of Contents for 340

Reviews:

Related manuals for 340

Brands by name

Popular brands