H39.MFVRS004EN-00
02.2019
5
/64
Assembly instructions
Multi-point locks, key operated
BS 230X, BS 250X, BS 260X
1.6
Transport
•
Block set the door leaf in the frame with door gap
restrictors.
•
The transit support provided must remain in the
main lock during the transport of a pre-assembled
door without cylinder lock.
•
For handling and transport, ensure that the locking
elements are in the locking position to prevent an
uncontrolled opening of the door.
•
Multi-point locks are sensitive components and
must therefore be handled with care. For example,
they must not be thrown, hit hard or bent.
•
Do not carry the door by the lever handle or hard-
ware when transporting it.
1.7
Dimensions
All measurements are given in mm.
1.8
Symbols used
The following icons are used in this document:
General warning symbol
Useful information or advice
Do not use mechanical force
Wear safety goggles
Wear safety footwear
Wear safety gloves
Continue reading the instructions at the correspon-
ding point
Milling cutter and drill dimensions
Groove length
Groove depth from bottom edge of face plate
Groove width
Through hole
Metal profiles
Timber profiles
PVC profiles