H39.MFVRS004EN-00
02.2019
43/64
Assembly instructions
Multi-point locks, key operated
BS 230X, BS 250X, BS 260X
4.11.3 Frame milling for 23/25/2600 T2 (safety lock)
Determination of position, see chapter
Always use safety goggles for milling
work.
H
34 mm
X
1
3
2
The cutting dimensions given refer to:
T2 striker plate: Safety lock
E8QT2H: Locking rail with T2
Contact the KFV customer service to find out
the cutting dimensions for other frame parts
or locking rails.
Bolt casing of the T2 safety lock
[1] 21.0 mm
[2] 155.0 mm
[3] Component height plus 1 mm
*The dimension "H" refers to the bolt
centre of the T2 safety lock.
The centre of the milling of the bolt
casing is 34 mm deeper.
In some cases the pivoting area of
the safety catch of the frame must be
laterally milled.
[1] 115.0 mm
[2] 4.0 mm + material thickness e.
g. of an angle striker plate
1
2
