10
4.2. DEFINITION OF THE PRODUCT.
4.2.1. Nomenclature.
SLC-8000-TWIN RT2 B1 WCO EE29503
MOD BAT TWIN RT2 2x6AB003 40A WCO EE29503
EE*
Special customer specifications.
CO
'Made in Spain' marking on UPS and packaging
(for customs purposes).
W
Private-label device.
B0
Without batteries.
B1
Device with extra charger and without batteries.
TWIN RT2 Device series.
8000
Power in VA.
SLC
Brand acronym (for UPS).
CF
Frequency converter (device without batteries).
EE*
Special customer specifications.
CO
‘Made in Spain’ marking on UPS and packaging
(for customs purposes).
W
Private-label device.
40A
Protection size.
003
Last three digits of the battery code.
AB
Initials of the battery family.
6
Number of batteries in one branch.
2x
Number of branches in parallel. Omit for one.
0/
Battery module without them, but with the
necessary accessories to install them.
TWIN RT2 Battery module series.
MOD BAT Battery module.
Note related to B0 and B1 batteries:
(B0) The device is supplied without batteries, but with
a space reserved for installation in the same box
for models whose standard version specifies this.
For other models, the battery pack will be installed
in the manner considered most appropriate (box,
cabinet, rack, etc.).
For B0 devices ordered, the cost of acquisition,
installation and connection of the batteries shall
always be borne by the customer or distributor
and
under their responsibility
.
Accessories such as screws, cables and battery
connection plates are considered optional and
can be supplied upon request.
(B1) Device with a more powerful charger, which does
not have a battery pack, nor the possibility of
installing them in the same box.
If an accumulator module is required, it will need
to be ordered as a separate item, which will be
connected to the UPS using the supplied cable.
Before connecting a module or group of batteries to the
device or another available module,
it is necessary
to check
that the voltage value printed on the back of
the device next to the battery connector is appropriate
and that the polarity between the means of connection
corresponds.
For more information, see Chapter 9 of this document.
