SICK W26, Operating Instructions Manual

Page: 23 / 168

WTB26x-xxxxxx30 WTB26x-xxxxxx31 WTB26x-xxxxxx32
2
1
4
3
2
1
3 4
6
2
1
3 4
5
1
BluePilot blue: sensing range display
2
Press-turn element / Potentiometer / Teach-Button: adjusting the sensing range
3
LED yellow: status of received light beam
4
LED green: supply voltage active
5
Press-turn element: time function adjustment
6
Teach pushbutton: adjustment of light/dark switching
4 Mounting
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
Note the preferred alignment of the sensor relative to the movement direction of the
object, see
figure 13 .
Figure 13: Alignment of the sensor relative to the object direction
Note the sensor’s maximum permissible tightening torque of < 1,3 Nm.
Note the preferred orientation of the object relative to the sensor, cf. see figure 23,
page 34 .
5 Electrical installation
The sensors must be connected in a voltage-free state. The following information must
be observed, depending on the connection type:
– Male connector connection: Note pin assignment
– Cable: wire color
Only supply/switch on the voltage once all electrical connections have been estab‐
lished.
Explanations of the connection diagram (following tables):
MOUNTING
4
8020354.1DS8/2021-11-24 | SICK O P E R A T I N G I N S T R U C T I O N S | WTB26 23
Subject to change without notice
en