Chapter
6
Operating Instructions
V200/V300
40
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012227/YT87/2016-03-29
Subject to change without notice
Application examples
6.3
Application with safe access on three sides (ergonomic
workplace design)
To realise an equally ergonomic and effective workplace, you can mount two safety
camera systems diagonally. In this way the hazardous point can be safely accessed from
three sides.
Due to the diagonal arrangement of the protective fields and the necessary minimum
distance, the working distance for the operator may be larger in this application.
⋅
In this application pay special attention to the correct mounting of the reflective tapes
as shown in the diagram. The reflective tapes must always be perpendicular to the
protective field area.
⋅
In this application the monitored area is mostly smaller than the working area available.
For this reason mark the contour of the monitored area on the working area if this
marking is not already provided by the reflective tape.
Note
Fig. 28: Ergonomic workplace
design due to the use of two
V200/V300
(view from above)
Notes
2
×
V200/V300
Hazardous area
Protective field
Angled surface
for mounting the
reflective tape
