![background image](http://html.mh-extra.com/html/sick/v200/v200_operating-instructions-manual_1264329028.webp)
Chapter
4
Operating Instructions
V200/V300
28
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8012227/YT87/2016-03-29
Subject to change without notice
Mounting
4.4.2
Mounting in a frame
⋅
Always mount the camera with at least two screws and use the fastening openings on
two opposite sides of the housing.
⋅
Secure the two fixing screws against unintentional loosening.
⋅
Always use washers under the screws (cf. figure).
⋅
Use sliding nuts suitable for the profile system employed for mounting the camera.
⋅
Pay attention to the thickness of the flange on the camera when selecting a suitable
screw length (see section 11.2 “Dimensional drawings” on page 56).
Protect unmonitored areas using mechanical guards!
⋅
Take organisational measures to protect the un-monitored areas (see section 4.3
“Avoiding unmonitored areas” on page 24).
Fig. 15: Mounting in a frame
Notes
WARNING