manualshive.com logo in svg

SICK SIM2000ST-E, Operating Instructions Manual, Page: 33 / 38

Share
Download
SICK SIM2000ST-E Operating Instructions Manual Download Page 33

11

Technical data

NOTE

The relevant online data sheet for your product, including technical data, dimensional
drawing, and connection diagrams can be downloaded, saved, and printed from the
Internet:

•

www.sick.com/SIM2000

Please note: This documentation may contain further technical data.

11.1

Features

Feature

Parameter

Task

data recording, evaluation, and archiving

Supported devices/excerpt Encoders, code readers, SICK LiDAR scanners

Technology

ARMv8 architecture based on:

•

2 x Cortex-A72

•

4 x Cortex-A53

•

2 x Cortex-M4F

•

dedicated M4F core for I/O handling

•

dedicated M4F core for I/O Link master functionality

•

Dedicated fieldbus controller

Software:

•

Can be programmed within the SICK AppSpace environment

•

SICK Interface & Algorithm API

Random Access Memory

4 GB DDR4

Flash memory

16 GB eMMC, of which 12 GB are available for applications

memory card (optional)

Two industrial-grade microSD memory cards (flash card), 2 x
max. 32 GB

application development
kit

SICK AppStudio

Sensor data processing

According to SICK Interface & Algorithm API

11.2

Interfaces

Feature

Parameter

Data storage and retrieval

Data logging via microSD memory card, internal RAM, and external
FTP

SERIAL (RS-232 / RS-422 / RS-485)

Quantity 4

Function RS-232 / RS-422 / RS-485

Maximum data transmis‐

sion rate

RS-232: 115.2 kBaud
RS-422: 2 MBaud
RS-485: 2 MBaud

FIELDBUS (fieldbus)

Quantity 2

Function Ethernet-based fieldbus

Data transmission rate 10/100 Mbit/s

Protocol ProfiNet, Ethernet/IP, EtherCAT (under development)

ETHERNET

TECHNICAL DATA 

11

8025454/1BLK/2021-03-30 | SICK

O P E R A T I N G   I N S T R U C T I O N S | SIM2000ST-E

33

Subject to change without notice

Summary of Contents for SIM2000ST-E







































Reviews:

No comments