manualshive.com logo in svg

SICK SIM2000ST-E, Operating Instructions Manual, Page: 12 / 38

Share
Download
SICK SIM2000ST-E Operating Instructions Manual Download Page 12

Thanks to the high-performance multi-core processor and a dedicated I/O processor
core, the device allows fast sensor data processing and the handling of input and
output signals in real time.

The SICK AppSpace open software platform enables tailor-made application programs
to be developed for demanding applications.

The HMI and data visualization features can be provided on any browser-enabled
notebook/PC or tablet. The app is developed in the SICK AppStudio SDKs.

SIM2000ST-E

Supply voltage

Power supply

ICR89x system

CAN bus

HOST

Reading clock

Conveyor speed

Light grid MLG

Object distance

(optional)

VMS4xx/5xx

CLV690

Object geometry

3.3

SICK AppSpace

Detailed instructions on the SICK AppStudio as well as programming the device can be
found at 

supportportal.sick.com

.

3.4

Preset Ethernet interfaces

NOTE

Preset IP addresses of the ETHERNET interfaces:

•

ETHERNET 1: 192.168.0.1

•

ETHERNET 2: 192.168.1.1

•

ETHERNET 3: 192.168.2.1

•

ETHERNET 4: 192.168.3.1

When expanding the Ethernet interfaces with one or more switches, it is essential to
use only jumbo-frame compatible Ethernet switches. Switches limited to just 100 Mb/s
do not support the data packet mode used by cameras and can cause transmission
errors.

3 

PRODUCT DESCRIPTION

12

O P E R A T I N G   I N S T R U C T I O N S | SIM2000ST-E

8025454/1BLK/2021-03-30 | SICK

Subject to change without notice

Summary of Contents for SIM2000ST-E







































Reviews:

No comments