background image

http://192.168.2.1/iolink/v1/devices/master1port1/parameters/13/
subindices

[

{

"subIndex": 1,
"subParameterName": "element_1"

},
{

"subIndex": 2,
"subParameterName": "element_2"

},
{

"subIndex": 3,
"subParameterName": "element_3"

},
{

"subIndex": 4,
"subParameterName": "element_4"

},

]
http://192.168.2.1/iolink/v1/devices/master1port1/parameters/13/
subindices/1/value
{

"va
lue
":
[

0,
1

]

}

GET/devices/{deviceAlias}/parameters

Output of a list with all parameters contained in the IODD and their names.

JSON parameters Type

Description

index

Integer

Parameter index via which the corresponding ISDU can
be accessed.

parameter-
Name

String

Name of the parameter from IODD.

parameterNa-
meURI

String

Name of the parameter without spaces. This name is
also used to access individual parameters.

Sample response:

SIG200 CONFIGURATION 

7

8017853.1D0S/2021-11-04 | SICK

O P E R A T I N G   I N S T R U C T I O N | Sensor Integration Gateway - SIG200

87

Subject to change without notice

Summary of Contents for SIG200



































































































































Reviews: