manualshive.com logo in svg

SICK SIG200, Operating Instruction

Share
Download
SICK SIG200 Operating Instruction Download Page 54

NOTE

The upload of one IODD file takes a few minutes. Depending on the size of the specific
IODD file the upload is faster or slower. It is not unusual in case the IODD upload needs
1-5 minutes or longer untill the IODD is fully visualized in the user interface.

Figure 18: 

CONFIGURATION

 page, IO-Link ports

The port owner determines who can write process data outputs. This can be set to
either fieldbus, REST or logic editor. When this setting is set to 

REST

, no available

process data outputs are displayed on the 

LOGIC EDITOR

 page.

If the fieldbus is the port owner, the minimum process cycle time is as short as possible
and cannot be changed because the port parameterization comes from the PLC.

The 

Data Storage

 function can be configured for 

Restore

 or 

Restore

 according to

the desired use case. If data storage is to be used, 

Expected Device ID

 and 

Expected Vendor

ID

 must be set.

NOTE

If an IO-Link port has been configured, click 

Apply

 to change the parameterization.

Otherwise, the parameterization will not be sent to the device.

NOTE

If 

Fieldbus

 (fieldbus) has been configured as the port owner, the parameterization is set

by the PLC and cannot be changed via the user interface. The corresponding control
surfaces are also grayed out in the Maintenance user level.

NOTE

The state of pin 2 is only mapped to the fieldbus processing data when the port owner
is set to 

Fieldbus

.

7.3.5.4

IO-Link devices

IODD view

The SIG200 user interface is manufacturer-independent and can be used to connect
and visualize IO-Link devices with connection class A from any manufacturer.

7 

SIG200 CONFIGURATION

54

O P E R A T I N G   I N S T R U C T I O N | Sensor Integration Gateway - SIG200

8017853.1D0S/2021-11-04 | SICK

Subject to change without notice

Summary of Contents for SIG200



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands