Chapter
1
Technical Information
RFID write/read device RFH630 (HF)
4
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8014957/YSU6/2016-01-08
About this document
This symbol refers to supplementary technical documentation.
Safety information
Read the notes on mounting and electrical installation prior to carrying out the work.
Read the quick start of the RFH630 to familiarize yourself with the device and its func-
tions.
Only use the device under permitted ambient conditions (e.g. temperature, ground po-
tential). Where necessary, official and statutory regulations governing the operation
must be complied with.
Opening the screws of the RFH630 housing will invalidate any warranty claims against
SICK AG.
Repair work on the RFH630 may only be performed by qualified and authorized service
personnel from SICK AG.
Customer service
If an error occurs, which cannot be eliminated, please contact SICK service:
Your appropriate SICK branch office and SICK subsidiary respectively
–
For telephone numbers and e-mail addresses, see back page of these operating in-
structions.
–
For the postal address visit www.sick.com.
Only return devices after consultation with the SICK service.
