![background image](http://html.mh-extra.com/html/sick/rfh630/rfh630_technical-information_1264213034.webp)
Chapter
3
Technical Information
RFID write/read device RFH630 (HF)
34
©
SICK AG · Germany · All rights reserved · Subject to change without notice
8014957/YSU6/2016-01-08
Electrical installation
3.7.9
Wiring the "External input 2" switching input in the CDB620-001 connection
module
CDB620-001
18
SGND
8
Shield
14
U
IN
*
17
In 2
CDB620-001
PNP sensor
V
S
GND
18
SGND
8
Shield
14
U
IN
*
17
In 2
Out
GND
S3
e.g. photo-electric
switch
V
S ext
RFH630
CDB620-001
PNP sensor
V
S
GND
3.32 K
6.64 K
U
IN
* = DC 10 V ... 30 V
V
in
= max. 32 V
18
SGND
8
Shield
14
U
IN
*
17
In 2
Out
GND
S3
e.g. photo-electric switch
CMC600
U
IN
*
GND
S3
U
IN
*
CMC600
CMC600
U
IN
*
a) Sensor supplied by CDB620-001
b) Sensor connected electrically isolated and externally supplied
d) Switch connected electrically isolated and externally supplied
c) Switch supplied by CDB620-001
Serial Aux
(RS-232)
Function assignment to "External input 2" via SOPAS:
- Start of reading clock
- Stop of reading clock
- If required further functions in the future
Switch S3: SGND-GND
ON:
GND of the sensor connected to GND
of
CDB620-001/CMC600.
OFF:
Sensor connected electrically isolated
to the CDB620-001/CMC600.
Reference potential valid for all switching
inputs ("Sensor 1/2" and "In 1/2")
Ratings for "External input 2"
("In 2“ switching input)
Power fed to the input starts the
assigned function, e.g. stop of reading
clock.
[default setting: logic not inverted
(active high), debouncing 10 ms]
– Optodecoupled, reverse polarity
protected
– Can be wired with the PNP output of
a sensor
Low: V
in
≤ 2 V; I
in
≤ 0.3 mA
High: 6 V ≤ V
in
≤ 32 V;
0.7 mA ≤ I
in
≤ 5 mA
Switching
behavior
Features
Electrical
values
ON
OFF
S3 : SGND-GND
No
YES
S4 : CMC
ON
OFF
S3 : SGND-GND
No
YES
S4 : CMC
No
YES
S4 : CMC
ON
OFF
S3 : SGND-GND
V
in
V
in
V
in
Software-controlled, the CMC600 transfers the
switching status of its physical "In 2" input
automatically via the cable to the serial Aux data
interface of the RFH630.
The RFH630 converts the status internally to its
logical "External input 2“.
"External
input 2"
Connect the switch as shown in b)