SICK PowerProx Micro WTT2SL Series, Operating Instructions Manual

Page: 24 / 158

Tasks Qualification
Electrical installation,
device replacement
■
Practical electrical training
■
Knowledge of current electrical safety regulations
■
Knowledge of the operation and control of the devices in their
particular application
Commissioning,
Configuration
■
Basic knowledge of the design and setup of the described
connections and interfaces
■
Basic knowledge of data transmission
■
Knowledge of the operation and control of the devices in their
particular application
Operation of the device for
the specific application
■
Knowledge of the operation and control of the devices in their
particular application
■
Knowledge of the software and hardware environment in the
application
2.7 Hazard warnings and operational safety
Please observe the safety notes and the warnings listed here and in other chapters
of these operating instructions to reduce the possibility of risks to health and avoid
dangerous situations.
2.8 Repairs
The product is a replacement device. The device is not intended to be repaired. Interfer‐
ence with or modifications to the device on the part of the customer will invalidate any
warranty claims against SICK AG.
3 Product description
3.1 Device view
6
5
7
1
2
3
4
Figure 8: Dimensional drawing
1
Green LED indicator: supply voltage active
2
Yellow LED indicator: status of received light beam
3
Fixing hole, Ø 3.2 mm
2
SAFETY INFORMATION
24 O P E R A T I N G I N S T R U C T I O N S | PowerProx Micro - WTT2SL(C) 8021879.1CXK /2021-09-20 | SICK
Subject to change without notice
en