Parameter
Factory setting
No, yes
-
8.5.4
Language
The language of the display texts can be set.
>
Device
>
>
Language
>
Parameter
Factory setting
Deutsch/German, Englisch/English
Englisch/English
8.5.5
Display settings
Settings can be made for the alignment, brightness, and switch-on/switch-off behavior
of the display.
Description of the parameters for the
switch display on/off
function:
•
Auto: The display switches itself off if no buttons are pressed for 3 minutes. The
display switches on again when a button is pressed.
•
Off: The display switches itself off when the button lock is activated. If the button
lock is not activated, the display switches itself off if no buttons are pressed for 3
minutes. The display switches on again when a button is pressed.
•
On: The display remains permanently on (not recommended, reduces the service
life of the OLED display).
>
Device
>
>
Display settings
>
Parameter
Factory setting
Switch display on/off:
Auto, off, on
Auto
Display brightness:
0% ... 100%
50%
Display alignment:
0°, 180°
0°
8.5.6
Measurement laser
The measurement laser can be switched off. No measurement is possible when the
laser is switched off.
NOTE
The laser can also be switched on/off via the In1 input.
8
OPERATION VIA DISPLAY
52
O P E R A T I N G I N S T R U C T I O N S | OD1000
8019642/ZJW1/2017-04-03 | SICK
Subject to change without notice
