SICK GM901, Operating Instructions Manual

Page: 65 / 94

65 8008250/1F7Y/V4-0/2022-06 | SICK O P E R A T I N G I N S T R U C T I O N S | GM901
Subject to change without notice
MENUS
9
9.3.11 Changing the calibration values
Display Action Note
▸
Select “ Calibration ”
▸
Press “ Enter ”
On-site calibration
▸
Press “ Enter ”
SPAN / Characteristic Curve
Basic factory setting: 1.00
Change possible, e.g., after successful
Span test
▸
Select with “ Arrow right ”
▸
Enter new value with “ Arrow down ” or
“ Arrow up ”
▸
Press “ Enter ”
Confirm with “ Enter ” to save new value
Possible setting range for Span:
0.50 ... 1.99
▸
Press “ Enter ”
Basic factory setting: 0
Offset correction possible, e.g., after a
reference measurement
▸
Select with “ Arrow right ”
▸
Enter new value with “ Arrow down ” or
“ Arrow up ”
▸
Press “ Enter ”
Confirm with “ Enter ” to save new value
▸
Press “ Arrow left ” (back)
Display returns to selection screen
Parameters
back
Humidity
Pressure
Parameter Settings
back
Analog Out Analog Out
Calibration
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back edit: Enter edit: Enter
Zero : 0 Zero : 0
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back
Zero : 0 Zero : 0
select
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back edit: Enter edit: Enter
Zero : 0 Zero : 0
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back
Zero : 0 Zero : 0
edit: Enter edit: Enter
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back
Zero : + 0 0 0 Zero : + 0 0 0
select
Parameters
back
Span : 1.00 Span : 1.00
Calibration
back
Zero : 0 Zero : 0
edit: Enter edit: Enter