10
8008250/1F7Y/V4-0/2022-06 | SICK
O P E R A T I N G I N S T R U C T I O N S | GM901
Subject to change without notice
2
FOR YOUR SAFETY
2
For your safety
2.1
Intended use
The GM901-02 serves exclusively to monitor CO concentrations of gases in industrial
plants.
The device measures continuously directly in the gas duct (in-situ).
2.2
Responsibility of user
Designated users
Correct project planning
– Basis of this Manual is the delivery of the device according to the preceding project
planning (e.g., based on the SICK application questionnaire) and the relevant delivery
state of the device (see delivered system documentation).
▸
If you are not sure whether the device corresponds to the state defined during project
planning or to the delivered system documentation: Please contact SICK Customer
Service.
Correct use
▸
Use the device only as described in “Intended use”.
▸
The manufacturer bears no responsibility for any other use.
▸
Carry out the specified maintenance work.
▸
Do not attempt any work on or repairs to the device unless described in this Manual.
Do not remove, add or change any components in or on the device unless such changes
are officially allowed and specified by the manufacturer.
Use only original spare parts and expendable parts from SICK.
Failure to observe these precautions could result in:
– Voiding the manufacturer's warranty.
– The device becoming dangerous.
Special local requirements
In addition to the information in these Operating Instructions, follow all local laws, technical
rules and company-internal operating directives applicable wherever the device is installed.
Read the Operating Instructions
▸
Read and observe these Operating Instructions.
▸
Observe all safety instructions.
▸
If anything is not clear: Please contact SICK Customer Service.
Retain documents
These Operating Instructions must be
– Available for reference.
– Passed on to new owners.
