13
Annex
13.1
EU declaration of conformity / Certificates
The EU declaration of conformity and other certificates can be downloaded from the
Internet at:
•
13.2
Typical reference values during operation
Depending on the set working distance, the mounting alignment and the 2D codes
used, a certain field of view size of the device and speed of the AGV is reached.
NOTE
The value specified in the table are only calculated reference values. Even if the device
setting is optimal and the code quality is good, this does not guarantee that the device
will achieve the specified speed and field of view. Uneven areas of the substrate and
other environmental influences could lead to deviating values.
NOTE
It is recommended to use the SICK multicode label as it is optimally tailored to the
application. The SICK multicode label also enables the highest overspeeds to be
reached. Alternatively, individual 2D codes provided by the customer can also be used.
The 2D codes must be dependent on the working distance and the mounting direction
of certain requirements on code resolution; see following tables.
The smaller the code size is, the higher the risk that the code will not be read in a sta‐
ble manner due to contamination or damage.
Table 19: Use of multicode labels (Data Matrix codes)
Working dis‐
tance [mm]
Horizontal
field of view
[mm]
Vertical field
of view [mm]
Effective ver‐
tical field of
view [mm]
V
max
[m/s]
1)
Shutter time
[
μ
s]
Brightness
Maximum reading
field width
Rea
dy
Resul
t
LED
Dat
a
LN
K
TX
LECT
OR
SI
CK
62
1
70
42,7
34,1
76,7
3.9
160
1.4
100
63,9
51,1
93,7
4.7
140
2.8
120
78,0
62,4
105,0
5.0
140
3.6
150
99,2
79,4
122,0
5.0
140
5.8
250
169,9
135,9
178,5
2.1
335
5.8
ANNEX
13
8024289//2019-08-15 | SICK
O P E R A T I N G I N S T R U C T I O N S | GLS6
53
Subject to change without notice
