10
FLOWSIC100 Flare-XT · Operating Instructions · 8023761/V1-0/2020-10 · © SICK Engineering GmbH
About this document
1.1
Function of this document
These Operating Instructions describe for the FLOWSIC100 Flare-XT measuring system with
FLSE100-XT sender/receiver units and Interface Unit:
● Device components
● Installation
● Operation
● Maintenance work required for reliable operation
For detailed information on functional checks/device settings, data backup, software
update, malfunction and error handling and possible repairs, see the Service Manual.
Retention of documents
▸
Keep these Operating Instructions and all associated documents available for refer
-
ence.
▸
Pass the documents on to a new owner.
1.2
Scope of application
These Operating Instructions apply exclusively to the FLOWSIC100 Flare-XT measuring sys
-
tem with the described system components.
They are not applicable to other SICK measuring devices.
These Operating Instructions cover standard applications which conform with the technical
data specified. Additional information and assistance for special applications are available
from your SICK representative.
It is generally recommended to take advantage of qualified consulting services provided by
SICK experts for your specific application.
1.3
Target groups
This Manual is intended for persons installing, operating and maintaining the device.
Operation
The device may only be operated by authorized persons who, based on their training on,
and knowledge of the specific device, as well as knowledge of the relevant regulations can
assess the tasks given and recognize the hazards involved.
Installing and maintaining
Skilled persons are required for installation and maintenance.
Please observe the information at the beginning of the respective Sections.
1.4
Data integrity
SICK Engineering GmbH uses standardized data interfaces such as standard IP technology,
in its products. The focus here is on the availability of the products and their properties.
SICK Engineering GmbH always assumes that the customer is responsible for the integrity
and confidentiality of data and rights involved in connection with using the products.
In all cases, the customer is responsible for the implementation of safety measures suit
-
able for the respective situation, e.g., network separation, firewalls, virus protection and
patch management.
