Approach
1.
Make sure that the environment is clean and clear of fog, moisture, and dust.
2.
Detach the bracket at the end furthest away from the cable.
3.
Remove the defective protective housing and end cap at the end furthest away
from the cable by rotating it gently.
4.
Completely remove the protective film from the new protective housing.
5.
Push the new protective housing on firmly as far as it will go.
6.
Remount the device in the bracket.
7.
Realign and check the device.
Further topics
•
•
9.4
Regular thorough check
The test is intended to ensure that the hazardous area is monitored by the protective
device and that unprotected access to the hazardous area is prevented.
b
Carry out the checks according to the instructions from the manufacturer of the
machine and from the operating entity.
MAINTENANCE
9
8021554/14Q7/2020-04-27 | SICK
O P E R A T I N G I N S T R U C T I O N S | deTem2 Core IP69K
45
Subject to change without notice