Item
Component
Description
1
Protective double bushing for the two
electrical connections in the terminal
compartment
The sleeve seals the connections and the
two line outlets to the outside. Use of both
pass-throughs, or only one pass-through
with a protective element for the free
pass-through.
Protective double bushing equipped with:
•
Recessed flat seal on the side to the
protective housing
•
One internal groove in each case at
the end of the bushings (cable outlet)
to accommodate an O-ring for sealing
•
Two captive mounting screws for
securing on the protective housing
2
O-ring
Inside diameter x cord thickness:
11.0
mm x 4.0
mm
Seals the plug connector for the “Ether‐
net” connection towards the protective
double bushing.
One O-ring serves as a spare part.
2
O-ring
Inside diameter x cord thickness:
13.5
mm x 3.0
mm
Seals off the plug connector for the
“Power/Serial Data/CAN/I/O” connection
towards the protective double bushing.
One O-ring serves as a spare part.
1
Protective element
If the Ethernet connection is not used, the
element seals off the free pass-through
of the protective double bushing. Suitable
O-ring: 11.0
mm x 4.0
mm.
1
Printed Safety Notes (safety information),
multilingual
The document contains:
•
Information on safe handling of the
device
•
Note for online access to the operating
instructions and other documentation
Connecting cables
Not included with delivery for the device is the required cables for connecting the
supply voltage/serial data/ I/O and for accessing the Ethernet. The cables must be
ordered separately. For an overview
Further required components
The following associated components are not included with delivery of the device. The
components are available on the Internet.
Table 3: Scope of delivery, other components
Component
Note
SOPAS ET configuration software and
device description file (*.sdd file for
SOPAS ET) for the CLV62x
Available online at:
•
Technical Information "CLV62x, CLV63x
and CLV64x with IP69K Protective Hous‐
ing", part no. 8021479 as a PDF in
the following languages: English, German.
Other languages may be available.
For devices with an IP69K protective housing.
Provides information about the electrical connec‐
tion and mounting the protective double bushing on
the protective housing.
Available online at:
•
3
PRODUCT DESCRIPTION
16
T E C H N I C A L I N F O R M A T I O N | CLV62x, CLV63x and CLV64x with IP69K Protective Housing
8021479/19ZB/2021-10-29 | SICK
Subject to change without notice