8
© SICK AG
•
Germany
•
All rights reserved
8014012/1EF3/2021-12-08
Subject to change without notice
Chapter
2
On safety
Operating Instructions
2.3
General safety notes and protective measures
A3M60 Basic
WARNING
Tab. 2: Disposal of the
assemblies
Please observe the following procedures in order to ensure the correct and safe use of
the A3M60 Basic.
The encoders are to be installed and maintained by trained and qualified personnel with
knowledge of electronics, precision mechanics and control system programming. It is
necessary to comply with the related standards covering the technical safety stipulations.
The safety regulations are to be met by all persons who are tasked with the installation,
the operation or the maintenance of the device:
The operating instructions must always be available and must always be followed.
Unqualified personnel are not allowed to be present in the vicinity of the system during
installation.
The system is to be installed in accordance with the applicable safety stipulations and
the mounting instructions.
The work safety regulations published by the Berufsgenossenschaften (trade asso-
ciations) and specialist associations in the related country are to be followed during
installation.
Failure to follow the applicable health and safety regulations may result in injury or
damage to the system.
The current sources and voltage sources in the encoders are designed as per the
applicable technical regulations.
2.4
Environmental protection
Please note the following information on disposal.
Assembly
Material
Disposal
Packaging
Cardboard
Waste paper
Shaft
Stainless steel
Scrap metal
Flange
Aluminium
Scrap metal
Electronic
assemblies
Various
Hazardous waste
