2
Safety information
2.1
Intended use
The sensor from the MPS-G product family is an intelligent, magnetic position sensor. It
is used for non-contact detection of the piston stroke of pneumatic drives with axially
magnetized permanent magnets.
SICK AG assumes no liability for losses or damage arising from the use of the product,
either directly or indirectly. This applies in particular to use of the product that does not
conform to its intended purpose and is not described in this documentation.
2.2
Improper use
•
The sensor does not constitute a safety-relevant device according to the EC
Machinery Directive (2006/42/EC).
•
The sensor must not be used in explosion-hazardous areas.
•
Any other use that is not described as intended use is prohibited.
•
Any use of accessories not specifically approved by SICK AG is at your own risk.
•
The sensor is not suitable for outdoor applications.
NOTICE
Danger due to improper use!
Any improper use can result in dangerous situations.
Therefore, take note of the following information:
b
The sensor should be used only in line with intended use specifications.
b
All information in these operating instructions must be strictly complied with.
2.3
Limitation of liability
Applicable standards and regulations, the latest state of technological development,
and our many years of knowledge and experience have all been taken into account
when assembling the data and information contained in these operating instructions.
The manufacturer accepts no liability for damage caused by:
■
Failing to observe the operating instructions
■
Improper use
■
Use by untrained personnel
■
Unauthorized conversions
■
Technical modifications
■
Use of unauthorized spare parts, consumables, and accessories
With special variants, where optional extras have been ordered, or owing to the latest
technical changes, the actual scope of delivery may vary from the features and illustra‐
tions shown here.
2.4
Requirements for skilled persons and operating personnel
WARNING
Risk of injury due to insufficient training.
Improper handling of the sensor may result in considerable personal injury and material
damage.
■
All work must only ever be carried out by the stipulated persons.
SAFETY INFORMATION
2
8025941/2020-07-16 | SICK
O P E R A T I N G I N S T R U C T I O N S | MPS-G with analog output
7
Subject to change without notice
