SICK 1108672, Operating Instructions Manual

Page: 20 / 38

8 Operation
8.1 General notes on operation
Teach possible using teach-in button.
NOTE
The user is responsible for the correct teach process.
8.2 Operating and status indicators
8.2.1 Control element
The beginning and end of the measuring range can be set via the teach-in button.
8.2.2 Status indicators
3 LEDs are arranged on the control panel. The two outer LEDs light up yellow and the
center LED in green.
The table below describes the individual function displays. The actual behavior of the
LEDs during operation represents a combination of these function displays.
Table 6: Function of the LEDs
Sensor
condi‐
tion
LED 1 (unmarked) LED 2 (PWR) LED 3 (MR)
Display Meaning Display Meaning Display Meaning
SIO
o
Does
not light
up No function dur‐
ing operation
F
Flash‐
ing Power ok
O
Lights
up
Magnet inside
the measuring
range
o
Does
not light
up
Magnet outside
the measuring
range
Error No error display via LEDs
Teach
This table only lists the LED behavior during operation.
The LED behavior during teach-in can be found in
chapter 8.3 .
8
OPERATION
20 O P E R A T I N G I N S T R U C T I O N S | MPS-G with analog output 8025941/2020-07-16 | SICK
Subject to change without notice