SICK 1108672, Operating Instructions Manual

Page: 17 / 38

6.2 Connections
6.2.1 Pin assignment/Connection d wire colors
MPS-GxxxxxxxAxxxxxxxxxxxxxxxxx: Open cable end
Table 3: Pin assignment for male connector, M8, A-coded, 4-pin
PIN Connection Pin assignment
1 BN + (L+)
2 WH U
OUT
3 BU - (M)
4 BK -
0.08 mm
2
AWG 26
MPS-GxxxxxxxCxxxxxxxxxxxxxxxxx / MPS-GxxxxxxxDxxxxxxxxxxxxxxxxx: M8 connection
Table 4: Pin assignment for male connector, M8, A-coded, 4-pin
PIN Connection Pin assignment
1 BN + (L+)
2 WH U
OUT
3 BU - (M)
4 BK -
2
1
4
3
MPS-GxxxxxxxExxxxxxxxxxxxxxxxx: M12 connection
Table 5: Pin assignment for male connector, M12, A-coded, 4-pin
PIN Connection Pin assignment
1 BN + (L+)
2 WH U
OUT
3 BU - (M)
4 BK -
1 2
3 4
6.3 Connecting the supply voltage
The sensor must be connected to a voltage supply with the following properties:
• Supply voltage DC 12 V ... 30 V, with switched-on Out-of-Range display 13 V ... 30 V
(SELV/PELV as per currently valid standards)
• Electricity source with at least 5 W power
ELECTRICAL INSTALLATION
6
8025941/2020-07-16 | SICK O P E R A T I N G I N S T R U C T I O N S | MPS-G with analog output 17
Subject to change without notice