Name
Color
Function
Result
Green
Programmable
Red
Programmable
Blue
Programmable
No light
Programmable
Laser
Green
Laser on
3.8
TriSpectorP1000 variants
TriSpectorP1000 is available with three different field of view (FoV) sizes and two
different window materials: glass and PMMA plastics. See the table below for part
numbers.
Table 6: TriSpector1008 (Small FoV)
Variant
Glass
PMMA
TriSpectorP1008 (Small FoV)
1091322
1091318
TriSpectorP1030 (Medium FoV)
1091321
1091319
TriSpectorP1060 (Large FoV)
1091323
1091320
3.9
Mounting a microSD memory card
The TriSpectorP1000 has a card slot integrated in the housing. This slot accommodates
a memory card in microSD format.
NOTICE
The screws for the microSD memory card lid must be tightened with a torque of 0.3 Nm
to keep the IP67 classification.
Follow the steps below to insert or remove a microSD memory card. The microSD
memory card slot is located next to the camera window.
1.
Release the two screws to remove the lid.
2.
Insert or remove the microSD memory card.
3.
Re-mount the lid and tighten the screws with a torque of 0.3 Nm.
For a specification of supported microSD memory cards,
.
3.9.1
Conditions for specified enclosure rating
To ensure compliance with the specified IP67 enclosure rating of the device during
operation, the following requirements must be met: If these requirements are not met,
the device does not fulfill any specified enclosure rating.
•
The cables plugged into the two electrical M12 connections must be screwed on
tightly.
•
Any electrical M12 connections (Ethernet connection) that are not being used
must be sealed with a tightly-fastened protective cap (as in the delivery condition).
•
The black cover (flap) on the rear of the device must be flush with the device and
screwed tight.
3
PRODUCT DESCRIPTION
18
O P E R A T I N G I N S T R U C T I O N S | TriSpectorP1000
8022395/19OK/2020-12 | SICK
Subject to change without notice
