3
Use and maintenance Manual AUTOMATIC GENSET CONTROL PANEL
with GC310/GC350
SICES is pleased to thank you for purchasing our Automatic Genset Control Panel.
These Control Panels are the result of the design, the selection of the best components, the careful
assembly and the strict tests to which all SICES products are submitted.
We recommend to read this manual carefully and to observe the safety rules and all regulations for
the correct use and maintenance of the Control Panel. This will guarantee better duration results and
efficiency.
In case of any doubts or questions, please do not hesitate to contact SICES technicians for
clarifications.
The information contained in this Manual are updated to the printing stage, but they may be modified
without notice in compliance with our aims of continuous development and improvement of products.
This manual and all enclosed documents are to be intended as part of the Control Panel and are
intended to be read by all those who are involved in the life cycle of the machinery; therefore they
must be collected in a well-known place and be accessible to the operators, keeping them carefully
in order to avoid their loss or deterioration.
This manual has been drafted for the installer, the user and the maintenance technician. It is
obligatory to read it carefully and view all electrical diagrams and instructions enclosed, as they
provide indications on the Control Panel use and also show the technical characteristics, as well as
the installation and assembling features.
The customer must observe all safety instructions.
WARNING:
The transfer switch control panel must be only used by properly trained
personnel.
The installation must only be planned and carried out by skilled personnel.
Any fault in installation and use may cause serious damage to the machinery,
to the user system and to the persons involved.
Please note that it is obligatory to observe the regulations in force in the Country where
the installation is carried out; in case of more than one regulation in force around the
same topic, always the strictest one must apply.
Summary of Contents for GC310
Page 32: ......
