12
Use and maintenance Manual AUTOMATIC GENSET CONTROL PANEL
with GC310/GC350
In front of the switch there is a series of devices, as:
1
Lock that impedes any electric or manual operation.
2
Mechanic indicator of the contacts status.
3
Bush for the insertion of the handle for the manual operation of the switch.
The motorized switch, thanks to its exclusive device, can be managed manually by a proper lever,
even in case of no connection to the remote control logic or damaged system.
The lock is important in case you would like to impede any operation to unauthorized persons, or in
case you would like to ensure that nobody changes the supply status, causing danger to those who
manage the plant. Using the frontal lock, the insertion of the handle for the manual operation is
impeded. With inserted lock, stopping the supply, the electric operation is inhibited too.
The genset control panel must be connected to receive MAINS and GENSET voltage values,
keeping GC310/GC350 in AUTO mode, so that the switch can close automatically on one of the two
sources and supply the plant.
2
TECHNOELECTRIC
FRONTAL VIEW MODELS
CS 4-5-6
WARNING
For the manual operation of the switch, disconnect the
electric command by removing the supply connector.
Then move the operation lever.
OTHERWISE THE DEVICE CAN BE DAMAGED
Summary of Contents for GC310
Page 32: ......
