13
Use and maintenance Manual AUTOMATIC GENSET CONTROL PANEL
with GC310/GC350
All genset control logics are carried out by the
GC310/GC350
controller with
microprocessor:
Set the GC310/GC350 controller in AUTO mode, using the selection arrows.
The operation cycle is composed as follows:
In case of mains failure or trespassing of the thresholds values set
(calibrations and configurations set in the GC310/GC350 controller)
and with GC310/GC350 in AUTO mode, the genset start-up sequence
begins.
Summary of Contents for GC310
Page 32: ......
