28
Use and Maintenance Manual ATS LOGICA CONTROL PANEL with ATS115
Before supplying the control panel with voltage on the Source A (Mains), make sure
of:
-
The respect of the above indications related to the installing, the electrical diagram
connection and sections suggested.
-
The respect of all the instructions and precautions described in the attachment supplied in
the documentation provided with respect to the operating voltage switch.
-
Keep the ATS115 key pressed to move it on OFF.
WARNING
: in order to avoid the cables whiplash and the switch damage in case of court
circuit, it is necessary to fasten the power cables once connected to the switch.
Below there is a principle scheme showing how to interface the panel with the plant. With regard to
the power connections, we can consider 2 types: with contactors (45÷125A), with motorized
changeover switch (160÷2500A). The XM auxiliary command is the same for both types.
- Couple of ABB contactors -
Source
B
Source
A
