SICE S 64E, Service Manual

Page: 27 / 54

Fig. 8a
If the values are not correct, repeat sensor calibration as described in the user and maintenance manual.
If the sensor needs to be replaced, proceed as follows:
-
Remove the plastic cover (A, Fig. 8b), undoing the four fastener screws, see figure 8b.
- Remove the ultrasonic sensor (B, Fig. 8b), undoing the two screws fastening it to the metal mount, then undo the ring nut of the
connector connected to the sensor.
-
Fit the new sensor, reversing the order of the operations used for removal.
Fig.8b