SICE S 52A, Instruction Manual

Page: 51 / 132

S 52A Operator’s Manual 51
Electrical and electronic equipments should never be disposed of in the usual municipal waste but
must be separately collected for their proper treatment.
The crossed-out bin symbol, placed on the product and in this page, remind you of the need to dispose
of properly the product at the end of its life.
In this way it is possible to prevent that a not specific treatment of the substances contained in these
products, or their improper use, or improper use of their parts may be hazardous to the environment
or to human health.
Furthermore this helps to recover, recycle and reuse many of the materials used in these products.
For this purpose the electrical and electronic equipment producers and distributors set up proper collection and treat-
ment systems for these products.
At the end of life your product contact your distributor to have information on the collection arrangements.
When buying this new product your distributor will also inform you of the possibility to return free of charge another end
of life equipment as long as it is of equivalent type and has fulfilled the same functions as the supplied equipment.
A disposal of the product different from what described above will be liable to the penalties prescribed by the national
provisions in the country where the product is disposed of.
We also recommend you to adopt more measures for environment protection: recycling of the internal and external pack-
aging of the product and disposing properly used batteries (if contained in the product).
With your help it is possible to reduce the amount of natural resources used to produce electrical and electronic equip-
ments, to minimize the use of landfills for the disposal of the products and to improve the quality of life by preventing
that potentially hazardous substances are released in the environment.
7. FIREFIGHTING MEANS TO BE USED
When choosing the most suitable fire extinguisher consult the following table:
Dry materials Flammable liquids Electrical equipment
Water YES NO NO
Foam YES YES NO
Powder YES* YES YES
CO
2
YES* YES YES
YES* Use only if more appropriate extinguishers are not on hand or when the fire is small.
CAUTION:
The indications in this table are of a general nature. They are designed as a guideline for the user.
The applications of each type of extinguisher will be illustrated fully by the respective manufacturers on request.
8. DATA ON SERIAL PLATE
Each machine has a data plate Fig. 1, with information about the machine and some technical data.
As well as the manufacturer’s details, it indicates:
Mod. - Machine model;
V - power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar - Operating pressure in bar;
Serial N. - the machine serial number;
EC - EC marking.