36
S 52A
Operator’s Manual
2.2 Bead Loosening and Tire Demounting
The S 52A tire changer is capable of servicing wheels from 14.5” to 26” with a width of up to 27” (695 mm). Most steer and
drive axle tires can be considered “Standard” tires for the purpose of this manual. Wide Base, Michelin
®
X One
®
, and
some rims would be considered “More Difficult.”
Standard Tire/Wheels
Place both bead rollers into tire carriage.
Tire not shown for clarity.
Beginning with the outboard bead, move the outboard bead roller into the working position.
Use the inboard/outboard and up/down controls to bring the bead roller against the sidewall of the tire.
The wheel edge should be no more than 3/16” (5 mm) from the top of the bead roller.
Press the bead roller lightly against tire.
NOTE:
Lubrication is essential for demounting.
While rotating the wheel in either direction, generously lubricate the tire bead area and slowly push the tire bead off of
the bead seat.
Summary of Contents for S 52A
