301 971
2010-11-18
|
Sicam srl società unipersonale
Operating instructions | JUMBO TCS60 | 39
en
10.
Once the operation has been carried out, tension
the tire by moving the rim away from the tool so
that the bead fits into the drop centre.
11.
Insert the special lever (1) between the bead and
the rim, so that the bead keeps touching the moun-
ting tool.
652117-19_Mi
1
12.
Move the mounting tool to the outside and bench
mark with the special rim edge reference; rotate
the rim until the front bead has come out comple-
tely.
13.
Lean the wheel down on the special platform thus
making enough space to comfortably remove the
tube, if present.
14.
To demount the rear bead rotate the mounting tool
by 180°, insert it between the rim and the bead,
bring it close to the edge of the rim and insert the
lever (1) by rotating clockwise the locking flange
until the operation is completed.
652117-20_Mi
Demounting of wheels with bead wire
1.
While operating the tool movement control, rotate
the tool so that the disk faces the side of the tire
that has to be bead-broken and, by means of the
working arm movement control, lock the operating
arm.
2.
By activating the working arm shifting control, posi-
tion the bead breaking disk in correspondence with
the inner edge of the rim.
3.
Use the special pin to lock the tilt of the tool with
the disk in position.
4.
By activating the working arm shifting control, use
the bead breaking disk to press the tyre heel to-
wards the rim centre and, use the pedal, turn the
tightening flange without interruption until the
locking ring is released..
i
Use mounting paste for complete detachment of tire
and rim.
5.
Use the appropriate lever (see special accessories,
Chap.3.4) (1), to remove the blocking ring from the
rim.
652117-21_Mi
1
6.
Put the wheel on the special platform thus making
enough space to comfortably remove the tube, if
present.
7.
When the operation has been completed, by acti-
vating the working arm shifting control, move the
working arm away from the rim and by activating the
working arm movement control, release the working
arm.
