- 25 -
z
During standby, press
MODE
to view environmental information. (See page 28.)
During manual operation, as soon as the
[START/STOP]
button is pressed, the blower will
run, and the sampler will start operating.
When the timer has been set, the following screen appears, and the system remains in
standby until the configured date and time. During standby, the message "WAIT" will blink
onscreen. When the configured date and time are reached, the blower will run, and the
sampler will start operating.
During Operation
When the blower is running and the sampler starts operating, the following screen appears. At
this point, the message "START" is highlighted. Pressing the
[START/STOP]
button during
operation will forcibly stop operation.
Manual Operation
Instantaneous flow rate
Elapsed time
Cumulative flow rate
z
During operation, press MODE to view environmental information. (See page 28.)
Delay Timer
Clock Timer
The remaining time appears
as a countdown.
The figure shows the screen when the sampling timer is set.
When the volume timer is set, the SAMP. TIME region changes to SAMP. VOL..
The measurement starting date
is shown.
Remaining Operating Time
Remaining cumulative flow rate
Sampling Timer Operation
Remaining operation time
