- 21 -
z
If the numbers next to CLOCK show a time
earlier than the present time, when the
numbers are pressed, the next full hour after
the present time will be shown, and the
system will proceed to the start time setting
screen.
E.g.) If the current time is 10:40 and the
numbers beside CLOCK reads "10:00,"
then when the numbers are pressed, the
display will change to "11:00," and the
system will proceed to the start time
setting screen.
z
Setting a time that is earlier than the present
time will engage manual operation (i.e.
pressing the
[START/STOP]
button will
immediately start operations).
Press the numbers next to CLOCK to proceed to
the start time setting screen, where the starting
time can be set.
From the left, the display shows the year (last two
figures of the western calendar), month, day, hour,
minute, and second.
Press the respective numerical regions to proceed
to the numerical value entry screen.
When the numerical values have been entered,
the system will return to this screen.
Press OK to confirm the setting value and
return to the main screen.
Press CANCEL to cancel the new settings and
return to the main screen.
In the numerical value entry screen, press the
numerical keys to enter the desired setting value.
In this screen as well, press a region with
underlined numbers to change the entry item.
Press
to confirm the numerical value and
return to the start time setting screen.
Press ESC to cancel entry and return to the
start time setting screen.
Press CLR to set the numerical value to "0."
Press BS to delete the last figure entered.
z
The time can be configured up to (20)99/12/31, 23:59:59.
z
Any date from 1 to 31 can be entered regardless of the month. If the number entered is
too large for the month however, it will be reset to the final day for that month.
E.g.) If April 31st is entered, pressing will reset the value to April 30th.
