- 20 -
z
Entering 0 hour and 0 minute will engage
manual operation (i.e. pressing the
[START/STOP]
button will immediately start
operations).
z
The time can be configured up to 99 hours and 59 minutes.
Setting the Operation Start Timer
Press the characters in the operation start timer area to switch between the delay timer and
the clock timer. The delay timer, shown onscreen as DELAY
, starts the operation after a
certain period of time has elapsed. The clock timer, shown onscreen as CLOCK
, starts the
operation at a specific hour and minute.
Press the numbers next to DELAY to proceed
to the start time setting screen, where the starting
time can be set.
Press the regions with the respective numbers for
hours and minutes to proceed to the numerical
value entry screen.
When the numerical values have been entered,
the system will return to this screen.
Press ESC to return to the main screen.
In the numerical value entry screen, press the
numerical keys to enter the desired numerical
values.
In this screen as well, press a region with
underlined numbers to change the entry item.
Press
to confirm the numerical values as
the setting values and return to the start time
setting screen.
Press ESC to cancel entry and return to the
start time setting screen.
Press CLR to set the numerical value to "0."
Press BS to delete the last figure entered.
