Si-tex T-760 Series, Instruction Manual

Page: 201 / 252

Chapter 9 MAINTENANCE AND CHECK
167
D045 DSP(Video) Alarm DSP detects VIDEO error.
D046 DSP(Trigger) Alarm DSP cannot receive TI interrupt.
D047 DSP(AZI) Alarm DSP cannot receive BP interrupt.
D048 DSP(HL) Alarm DSP cannot receive BZ interrupt.
D049 DSP Error Alarm Abnormal operation(infinite loop) of DSP.
D050 LAT(Out of Bounds) Caution
The own ship’s latitude is 80 degrees or more
(indicating that some functions are limited).
Display AIS, waypoint, mark/line, own ship trail, etc. for
80 degrees or more.
Input operations for 80 degrees or more ( refer to “High
Latitude “alarm)
D051 TT(Out of Range) Alarm TT is too far to be tracked.
D053 Flash ROM Error Alarm Initialization error of flash ROM file system during
startup.
D054 USB Error Alarm Initialization error of USB during startup.
Area1(Approach) Alarm Echo in area1.
Area1(Secession) Alarm No echo in area1.
Area1(Out of Range) Alarm Rectangle area 1 is out of range.
Creation of area 1 is out of range.
Area2(Approach) Alarm Echo in area2.
Area2(Secession) Alarm No echo in area2.
Area2(Out of Range) Alarm Rectangle area 2 is out of range.
Creation of area 2 is out of range.
TT(CPA/TCPA) Alarm TT is changed to a dangerous ship
TT(New Target) Alarm TT is automatically acquired.
TT(Lost) Alarm TT is lost.
GPS(Error) Status Failed to set GPS.
GPS(HDOP) Caution Received excessive HDOP value beyond the setting.
TM Reset Status For TM, the own ship position is out of 60% of the radius
of PPI.
Max Point Status Exceeded the maximum number of marks.
File Not Found Status File does not exists.
USB Memory Not Set Status USB memory does not exists.
File Read Error Caution Failed to load the file.
File Write Error Caution Failed to write the file.
Not Enough Space Status Insufficient capacity.
Format Error Caution Failed to format
Num of files Over Caution Writing data to the USB memory in which the number of
the file has reached to the maximum.
File Erase Error Caution Failed to delete the file
TT(Max Target) Status Manually acquired when the number of acquisition