Si-tex T-760 Series, Instruction Manual

Page: 200 / 252

Chapter 9 MAINTENANCE AND CHECK
166
D025 Turn(Time Out) Alarm Cannot receive valid turning ratio sentences (including
checksum error) which had been received properly.
D026 Turn(Data) Alarm Cannot receive valid turning ratio data which had been
received properly.
D027 Rudder(Time Out) Alarm Cannot receive valid steering direction sentences
(including checksum error) which had been received
properly.
D028 Rudder(Data) Alarm Cannot receive valid steering direction data which had
been received properly
D029 AIS(Time Out) Alarm For AIS function=ON, cannot receive valid AIS data
(including checksum error) which had been received
properly.
D030 AIS(Data) Alarm For AIS function=ON, cannot receive valid AIS data
which had been received properly.
D031 AIS(Alarm001) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D032 AIS(Alarm002) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D033 AIS(Alarm003) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D034 AIS(Alarm004) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D035 AIS(Alarm005) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D036 AIS(Alarm006) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D037 AIS(Alarm008) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D038 AIS(Alarm025) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D039 AIS(Alarm026) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D040 AIS(Alarm029) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D041 AIS(Alarm030) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D042 AIS(Alarm032) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D043 AIS(Alarm035) Alarm For AIS function=ON, an error from the AIS receiver is
received(ALR).
D044 Set Gyor Status Requires setting of true bearing.