Si-tex T-760 Series, Instruction Manual

Page: 176 / 252

142
Chapter 8 DETAIL PERFORMANCE SETTINGS
8.5.6.1 INTERNAL MEMORY TO USB
You can copy the system settings which were saved in the internal memory (such as various item settings of
menus, etc.) to a USB flash memory. To copy the settings which were saved in the internal memory, a USB
flash memory must be inserted into "USB MEMORY" port on the control panel beforehand. When you
replaced the processing circuit inside the display unit, you can restore the system by load the data stored in
the USB flash memory and write it to the system memory.
It should be saved to USB flash memory when the system settings are completed. And we strongly
recommend that you save the operating conditions to a USB flash memory on a regular basis.
Items which can be saved to a USB flash memory are following.
RADAR Echo: Outputs the RADAR Echo settings in the Main Menu and the Adjust Menu via USB.
Function Setting: Outputs the Function Settings via USB.
Basis Adjustment: Outputs the Basic Adjustment settings in the Adjust Menu via USB.
Main Menu: Outputs the settings of the Main Menu and radar screen via USB (except RADAR Echo and
Function Settings).
Adjust Menu: Outputs the settings of the Adjust Menu via USB (except RADAR Echo and Function
Setting).
All Menu: Outputs all internal settings via USB (except marks, lines and own track data).
Marker Setting: Outputs the Mark Setting via USB.
8.5.6.2 USB TO INTERNAL MEMORY
Load the data stored in the USB flash memory and write it to the system internal memory. Through this
operation, you can return the system to the previous operation condition after replaced the processing circuit.
If the USB memory is not recognized by causes such as compatibility,
please tory the following items.
・
Format the USB flash memory in FAT32 format.
・
If it has been formatted in FAT32 format already, delete all files in USB
flash memory.
You cannot use a USB flash memory built the following functions.
・
Encrypting contents.
・
Checking virus infection.
It may take a lot of time to access USB flash memory during transmission.
We recommend that you use USB flash memory during standby.