Si-tex T-760 Series, Instruction Manual

Page: 116 / 252

Chapter 5 VARIOUS FUNCTION ICONS
82
You can use “Line” function to draw some lines on the screen.
There are some differences between “Memo” function and “Line” function as following.
“Line” function is linked to a change of the range.
“Memo” function does not.
To use “Line” function, GPS signal input is necessary.
“Memo” function
need not.
If no GPS signal is input, you cannot select the “Line” function.
You can change the color and width of lines.
You can undo and redo the lines.
You can delete all the lines by tapping the clear bar.
You can select a marker to display by tapping the view menu bar.
⑩
Return to Maker meuns.
Tap .
⑪
All icons appear.
Then flick down the screen.
⑫
Only resident icons appear.
Then flick down the screen again.
⑬
Return to the start up screen.
Tap
“
Range down
”
bar.
⑭
Range changed.
Line is linked to a change of the range.