Si-tex COLOR MAX 15, User Manual

Page: 61 / 118

63 User Manual
appropriate warning message will be shown to notify that the Navigation to the
external Destination is active and to confirm whether Slave mode can be set.
Setting Slave mode, the C-Link Navigation Data will be deleted.
The C-Link Navigation Data are deleted at Power Off.
C-LINK NAVIGATION DATA: ACQUISITION AND DISPLAY
As soon as the C-Link Navigation Data is received, the Slave parses the information
received and executes the relative actions depending on its current working status.
Note When the Navigation to the external Destination is activated, the Slave Chart
Plotter will show all relevant C-Link Navigation Data exactly like when the
Destination is not the external one (Destination Name, DST and BRG to
Destination, calculate XTE, calculate TTG etc). These values will be displayed all
places where required and they will be used to format NMEA-0183 output data.
GRAPHICAL REPRESENTATION ON MAP DISPLAY
Fig. 5.1 - Graphical Displaying
ROUTE DATA REPORT
When the Navigation to the External Route is received, it will be possible to display
the information related to the External Route by entering the Route Data Report.
Fig. 5.1a - External route on Route Data Report
♦
External Route : Name of the External Route (from
$PCMPN,0)
♦
Cruising Speed : Planned Cruising Speed (from $PCMPN,1)
♦
Total Route length : Length from First to Last Wpt (from
$PCMPN,1)
♦
Waypoints in Route : No. of Wpts in the Route (from $PCMPN,1)
♦
Remaining Waypoints : No. of Wpts from Dest to Last Wpt (from
$PCMPN,1)
♦
Fuel Consumption Rate : Planned Fuel Consumption Rate (from
$PCMPN,1)