Si-tex COLOR MAX 15, User Manual

Page: 38 / 118

40 User Manual
NORMAL size LARGE size
Fig. 3.2 - Example of Normal size font (on the left side) and Large size font (on the right side) settings
PERSPECTIVE VIEW
[MENU] + "PERSPECTIVE VIEW" + [ENTER]
Chart data may be projected in perspective mode during navigation. This function
allows setting the panoramic View of the chart. As the upper side of the map is more
compressed than the lower side, a wider map area is visible. The perspective view
allows showing more chart information immediately ahead and around the cursor.
Fig. 3.2a - Perspective View
DYNAMIC NAV-AIDS
[MENU] + "DYNAMIC NAV-AIDS" + [ENTER]
This function allows settings blinking lights on Nav-Aids. The blinking period and
color of each Nav-aid is read from the Nav-Aid attributes available on the data
cartridge. When the ship is inside the Nav-Aid nominal range, the light of the Nav-
Aid will start blinking.
NOTE When Dynamic Nav-Aids option is set to On, when the flashing light is Off, or
when fix position is out of the sector, the light color is displayed by using a
faint light color.
MAP ORIENTATION
[MENU] + "MAP ORIENTATION" + [ENTER].
The possible choices are listed in the table below:
North Up : The map is shown with North upwards.
Head Up : The map is shown with the ship's current heading upwards. If Head Up is selected, it is possible
to set the Map Orientation Resolution angle in the range [5, 60] degrees.