Various adjustments
225
14.3 Adjusting contrast
Here, it is possible to adapt the contrast to the lighting conditions.
1
Select and confirm «
Contrast »
.
An adjustment system using a cursor is displayed to adjust the screen contrast.
2
Adjust the screen contrast by pressing «
◄ » and « ►» keys and confirm with
<START/ENTER>
key.
3
Come back to the main menu with
<ESC>
key.
14.4 Reset
It is possible to reset (initialize) the measurement settings or all settings.
Remark
The reset function is only available for users belonging to the user group « Administrator ».
There are different possibilities to reset the instruments settings.
Parameters reset
All settings are deleted except the memory
which contains measurements results, methods
defined by the user and the measured blank
values.
Delivery conditions
All settings (including measurement data
memory and user-defined methods) are deleted
and the spectrophotometer is reset to the deliv-
ery condition.
Service lamp counter
Allow to reset to zero the service lamp counter
after the lamp changing
The menu where to select the reset type (
Delivery condition
/
Reset configuration
) is displayed.
1
Select and confirm the reset type.
The reset is carried out.
<HOME>
–
[General setup]
- Display settings
<HOME>
–
[General setup]
- Reset
Summary of Contents for UviLine 8100
Page 90: ...90 Speicher 12 Speicher 12 1 berblick...
Page 206: ...206 Memory 12 Memory 12 1 General view...
Page 235: ......