SI Analytics UviLine 8100, Operating Manual, Page: 211 / 236

Memory 211
For the measuring modes,
Concentration and Multi wavelengths, it is possible to save every measured value
automatically with ( AutoStore ) function.
All automatically saved measurement datasets are given the label "AutoStore". If the same measurement da-
taset is manually saved using (
<STORE> ) key, the "AutoStore" label is overwritten by ID code given by the op-
erator.
- Select « AutoStore » with «
▲ » and
«
▼ » keys and confirm with
<START ENTER> key.
The symbol at the end of « AutoStore » indicates that the function is active. If this function is not active,
it means that data will be saved manually only with <STORE> key.
Remark
The AutoStore setting is only valid for the measuring modes Concentration and Multi wavelengths .
12.3.4 Filtering results
12.3.4.1 Filtering a results group
It is possible to select a result or a group of results with the “Filter” function.
The functions display, delete and download stored measurement datasets refer to all stored measurement
datasets that correspond to the specified filter criteria.
Filter criteria
The following filter criteria can be set:
<HOME>
Concentration,
Absorption / % Transmission
or
Multi-wavelengths
– [Setup] or [General setup] from main menu
– Measured value memory
– [Setup]
– Filter