- 42 -
3.3 System Memory Configuration
The MV18/MV19 mainboard has two 168-pin DIMM slots that allow you to
install from 16MB up to 2GB of system memory.
Each 168-pin DIMM (Dual In-line Memory Module) Slot can accommodate
16MB, 32MB, 64MB, 128MB, 256MB, 512MB, and 1GB of PC100/PC133
compliant 3.3V single or double side 64-bit wide data path SDRAM modules.
Install Memory:
Install memory in any or all of the slots and in any combination shown as
follows.
Note:
You do not need to set any jumper to configure memory since the
BIOS utility can detect the system memory automatically. You can
check the total system memory value in the BIOS Standard CMOS
Setup menu.
Upgrade Memory:
You can easily upgrade the system memory by inserting additional SDRAM
modules in available DIMM slots. The total system memory is calculated by
simply adding up the memory in all DIMM slots. After upgrade, the new
system memory value will automatically be computed and displayed in the
field " Standard CMOS Setup" of BIOS setup program.
DIMM Slot
Memory Modules
Module
Quantity
DIMM 1
16MB, 32MB, 64MB, 128MB, 256M
B,
512M
,
and 1G
B 168-pin 3.3V SDR SDRAM DIMM
x 1
DIMM 2
16MB, 32MB, 64MB, 128MB, 256M
B,
512M
,
and 1G
B 168-pin 3.3V SDR SDRAM DIMM
x 1
