- 38 -
#
#
#
#
#
Internal Peripherals Connectors
Enhanced IDE Ports and Floppy Connector
The MV18/MV19 mainboard features two 40-pin dual-channel IDE device
connectors (IDE1/IDE2) providing support to up to four IDE devices, such as
CD-ROM and Hard Disk Drives (H.D.D.). This mainboard also includes one
34-pin floppy disk controller (FDC) to accommodate the Floppy Disk Drive
(F.D.D.). Moreover, this mainboard comes with one 80pin ATA
100/66/33
ribbon cable to connect to IDE H.D.D. and one 34-pin ribbon cable for
F.D.D. connection.
Note:
Please connect you system
H.D.D. to IDE 1
Important:
Ribbon cables are directional, therefore, make sure to always
connect with the red cable stripe on the same side as pin #1
of the IDE1/IDE2 or FDC connector on the mainboard.
D1
IDE1
1
1
IDE2
1
FDD1
